-
Rotor Bolt - Yamaha RD350/400 M7x60mm. This is the bolt that secures the rotor/magneto/points cam. This is an aftermarket bolt, different length than stock but will work on the RD350/400.
-
RZ350 Battery Strap (all years/models) OEM Yamaha part.
-
RZ350 Carburetor Float Set (sold each). 1 set required per carburetor. Reproduction part by K&S.
-
RZ350 Float Needle Assembly - Genuine Mikuni made in Japan. Includes metal tip needle for long life, needle seat and viton o-ring. Fits 1984/1985 USA RZ350. Sold each.
-
Yamaha RZ350 Power Valve Seal Kit. Includes 3 castle type oil seals and 4 O rings. Yamaha OEM part.
-
Ready to run system - bolt on - Racing ignition by Powerdynamo. Engineered and manufactured with high quality components made for the extreme demands of racing. High-speed (up to 22.000rpm) magnet based solid state ignition for sports purposes. At 18.000rpm (i.e. 36.000 sparks/min) still 25kV output. (3.000-8.000rpm = 40kV, see diagram). Diameter of rotor is 59mm, rotor weight 180 gramms. This ignition is for racing, no charging component, no lighting capabilities.
- note: Total loss racing ignition system - requires starter roller or bump start, does NOT work with kick starter
-
RZ350 Thermo Sensor - Canadian Models - All years. Aftermarket Part. (tapered threads)
-
RZ350 Thermo Sensor - Canadian Models - All years. OEM Part.
-
RZ350 Thermo Sensor - US Models - All years. Reproduction part, no longer available from Yamaha. Replaces Yamaha part no. 48H-85790-00-00.
-
RZ350 USA - Front Master Cylinder Reservior Diagphragm
-
RZ350 USA Rear Caliper - Square section O-ring seals for caliper crossover (fits between caliper halves) - reproduction part, not available from Yamaha (sold in pairs)
-
RZ350/Banshee Air Box Clamp (secures boot (joint) to air box) 90460-68230-00 Reproduction. Note this part has a yellow/brass finish much different than the original but works well same dimensions as stock clamp. sold each.
-
RZ350/RD350YPVS Thermostat - All years. Reproduction part. Temp 71C.
-
Safety Wire - Stainless Steel safety wire in .028 or .032. Spooled in a convenient plastic casing. Perfect size for storage compartment or pocket. Available in two different diameters and lengths. Click add to cart and choose size. .028x120' or .032x75'.
-
Sample pack containing approximately 3" each of our Wire Covering/Loom/Sheathing in Black PVC in 4mm, 5mm, 6mm, 7mm, 11mm and 14mm or Sample pack of silver/gray loom in 6mm, 8mm and 12mm. Use our handy sample packs to determine the correct wiring for your application. Choose Color, then click add to cart.
-
SBS Ceramic High Performance Brake Pads Yamaha - RD350 RD400 RD250. These ceramic brake pads are suitable for street or race use. Also fits TX500,TX650,TX750,XS650.
- Extremely quiet – vibration damping ceramic composite virtually eliminates brake "grind" noise and pad "squeal"
- Excellent "cold morning" braking performance – no warm-up required
- Smooth, progressive and controlled braking with exceptional lever response
- Fast thermal recovery between high-energy stops with minimal high-temperature "brake fade" compared to organic or organic/Kevlar pads
- Increased rotor life – bonded ductile metal filament structure dramatically reduces rotor wear
- Long pad life – durable high-strength bonded ceramic-fiber structure increases pad life over organic or organic/Kevlar pads
- Low-dusting formula contains no ferrous (iron) compounds that can discolor matte/polished aluminum alloy or chrome-plated wheels
-
Billet Aluminium steering stabilizers with clear finish, come in a variety of sizes for custom applications. All stabilizers have 7 damping adjustments and are completely rebuildable. Designed to reduce head shake/wobble, lightweight race quality, finned body for maximum cooling. Available in Standard, Short, Long and Extra long sizes. Choose length and click add to cart.
-
Shorty Shocks for the RD250/350/400/R5
- Easily lower your bike simply by installing these shocks
- 11.4" / 298mm length eye to eye
- 5 position preload adjustment
- Pre-installed springs - shocks ready to mount
- Available in 4 configurations:
- Black Body / Chrome Springs
- Chrome body / Black Springs
- Black Body / Black Springs
- Chrome Body / Chrome Springs
- sold in pairs
- Note: This product has additional shipping charges
-
Silicone Radiator Hose Set - RZ350 - Multiple color choices. Set of 4 High Performance Radiator Hoses individually pre-formed hoses specifically for the RZ350. Available in Black, Red, Yellow, Blue or White. Replaces part numbers 22, 30, 32, 35 in the Yamaha Diagram. Click on the picture for more views, color samples and the Yamaha diagram. Stainless steel hose clamp sets also available for this kit here on the site.
-
Silicone Radiator Hose Set - RZ350 - Multiple color choices. Set of 4 High Performance Radiator Hoses individually pre-formed hoses specifically for the RZ350. Available in Black, Red, Yellow, Blue or Natural like the original hoses. Also available in natural black with no logos (not pictured). Race quality part, hand made in England by Samco, Each hose is visually inspected. Max temp 180C/356F. Meets and exceeds SAEJ20R1 Class A standard. By Samco, a leader in high performance silicone hoses used by Wolrd Superbike race teams. Replaces part numbers 22, 30, 32, 35 in the Yamaha Diagram. Click on the picture for more views, color samples and the Yamaha diagram. Stainless steel hose clamp sets also available for this kit here on the site. (the single hose pictured is Natural finish, no printed logos, similar to the original RZ hoses)
-
Silver/Gray Electrical Tape. OEM-Quality Silver-Gray PVC electrical tape. 19mm wide x 25 meters long. Superb reproduction of original factory tape.
-
Sleeve Retainer by Permatex. OEM specified. High temperature (up to 400
-
POWERTYE 1" wide Tie-Downs (1 pair) with built in soft-tyes: (Choose add to cart and pick color)
-
PLUG AND CONTACT CLEANER - excellent product for cleaning spark plugs, points and electrical parts & connectors. Quickly cleans and degreases all metal and aluminum surfaces, fouled spark plugs, carburetors and other small parts. Nonconductor formula for use on electrical systems, electric switches, connections, motors, starters, and alternators. Will not damage engine parts, carburetors, brake parts, ignition parts, spark plugs or engine sensors. 20 oz. aerosol spray.
-
Spark Plug Cap - 5K or 0K resistance for 14mm spark plug, with 90 degree Elbow (RD/RZ/R5), NGK Type - Reproduction, sold each. These caps are just right for the RDs and other 2 stroke vintage Japanese twins. Includes waterproof covers. For terminal stud type plugs or plugs with removeable terminal nuts (BR8ES, BR8HS). It is not recommended to use both resistor caps and resistor plugs, use either resistor plugs with non-resistor caps, or non resistor plugs with resistor caps.
-
Speedometer Cable - RZ350 by Motion Pro. High quality cable meets or exceeds OEM standards.
-
Stainless Steel Radiator Hose Clamp Set - RZ350, by Samco. High quality stainless steel radiator hose clamps, set of 8 to go with our hose kits also available here on the site. These clamps are made specifically for silicone hoses and will not pinch or tear the silicone. These clamps are also suitable for the stock rubber hoses. This is a high performance SamcoSport hose clamp kit which replaces your standard factory hose clamps with the highest quality stainless steel worm drive hose clamps available. These hose clamps are entirely made from marine-grade 304 W5 stainless steel and have a 13mm wide band which increases their clamping force. Greatest performance when fitted with your SamcoSport silicone hose kit.
-
Sale!Standard 1/4" Fuel Line - Bulk 25 Feet. Black Rubber. 6.4mm ID, 11mm OD. Not for use with fuel containing 10% Ethanol or more.
-
Superbike Grips Model 699. Unique materials, grip patterns and construction provide a look and feel unlike any other grip. Made from the same high-tech rubber compounds used in Formula One racing cars. Supersoft and superdurable with unsurpassed adhesion. All are open-ended with high-impact plastic end caps. For machines with 7/8" handlebars. Used by Troy Corser and other championship riders worldwide. Made in Italy. Available in black only.
-
TDR Hyper Tension Reeds - Yamaha RD250/350/400. By Tony Doukas Racing. The tuner and racer's choice in reed technology. Custom design by TDR to give maximum performance, flow and long life, excellent high rev performance. Highest quality fiber reeds available, each kit contains 2 sets of reeds, enough reeds to do 2 carbs/1bike. Note: One package of reeds is enough to do one bike, two cylinders. Available in 3 stages: Stage 1 (yz125 style) - Stock to mildly modified engines. These double petal reeds are .018" thick and offer excellent throttle response and added performance. These reeds are based on the Yamaha YZ125 reeds but resized to fit the RD reed cages, no cutting or mods required. Stage 2 - Stock or slightly modified engines (chambers/filters/no porting). These double petal reeds are .020" thick and offer excellent throttle response and added performance. Slightly stiffer than our stage 1 reeds. Stage 3 - For highly modified engines or racing applications. These Single petal reeds are .020" thick and offer excellent throttle response and added performance. Much stiffer than our stage 1 or 2 reeds.
-
Terminal Extraction Tool. Perfect high quality terminal extraction tool used for removing spades from all types of terminal blocks. Great for all makes of motorcycles, cars, scooters and other applications. Anodized aluminum body. 6 tools in one, includes 3 rectagular blades, flat blade, fork blade and spring loaded tube for weather pack terminals. By Lisle tools.
-
Throttle Cable 1 (Yamaha part no. 48H-26260-00-00 superceded to 48H-26260-09-00 superceded to 48H-26260-08-00). Genuine Yamaha Cable. This is the cable that's goes to the 2 way splitter. Note: the RZ has 2 throttle cables, this is cable 1, the other cable is not available at this time.
-
Throttle Cable for Larger Carbs and Stock Throttle Housing w/o Oil Pump Line (VM's, TM's, Keihin, PWK). Built in adjusters allow a wide range of applications. Works with the following carburetors: Mikuni VM Round slides 30, 32, 34, 36, and 44mm Mikuni TM Flat slides 28, 32, 34, 36, and 38mm Keihin PWK 28, 33, 35, 36mm
-
Throttle Cable for Larger Carbs and Stock Throttle Housing with Oil Pump Line (VM's, TM's, Keihin, PWK). Built in adjusters allow a wide range of applications. Works with the following carburetors: Mikuni VM Round slides 30, 32, 34, 36, and 44mm Mikuni TM Flat slides 28, 32, 34, 36, and 38mm Keihin PWK 28, 33, 35, 36mm