-
Mirrors - Yamaha RD350 Replacement Mirrors - Pair. Stock mirrors are no longer available from Yamaha for the RD350. These are the closest in size and finish that we could find and make a great stock replacement mirror. Nearly identical to originals. Note: Right hand mirror has left hand threads same as originals. Sold in pairs.
-
RD350 Y-Boot Intake - Genuine Yamaha Part. Also Referred to as JOINT, AIR CLNR, part no 360-14453-00-00
-
RD350 Y-Boot Intake, Also Referred to as JOINT, AIR CLNR, Yamaha part no 360-14453-00-00, this is a reproduction part.
-
RD350/250 1973-1975 Speedo/Tach Damper Set - Sold as a set of 2 dampers. High quality reproduction rubber part. Replaces OEM part 360-83513-00-00. Note this is the visible upper damper on the gauge face, NOT the lower inside the cup.
-
RD350/250 1973-1975 Internal Speedo/Tach Damper - Sold each. High quality reproduction rubber part. Reproduction part Replaces OEM part 360-83523-00-00. Note these go inside the gauge cups and are not visible from the outside.
-
RD350/250/R5/DS7 Carburetor Float, sold each (2 per carb). Genuine Mikuni Part
-
RD350/250/R5/DS7 Footrest Damper. Reproduction part, sold each. 4 required per bike
-
RD350LC Reproduction Wiring Harness, originals no longer available from Yamaha. All wiring colors and connectors are the same as stock and is a direct fit replacment, but may vary slightly from original harness in terms of materials used for loom, color of plastic connectors, and other minor differences, etc.
-
RD400 (all years) Carburetor Float, sold each. Genuine Mikuni Part.
-
RD400 520 Conversion Shim Kit. Shim kit includes shims for front and rear sprockets used in our 520 conversion sprocket/chain kits for the RD400. Choose model and click add to cart
-
RD400 (all) Rear Master Cylinder Dust Boot. Reproduction Part, sold each
-
RD400 (all) Side Cover Grommets. New Yamaha OEM, includes all grommets for right side cover for 1976-78 RD400. Also fits 1979 RD400F Daytona right and left side covers (you need one set for each side). OEM part no. 90480-01401-00 x1 & 90480-12053-00 x2
-
RD400 (all) Side Cover Grommets. New Yamaha Reproduction, includes all grommets for right side cover for 1976-78 RD400. Also fits 1979 RD400F Daytona right and left side covers (you need one set for each side). Replaces OEM part no. 90480-01401-00 x1 & 90480-12053-00 x2
-
RD400 Clear Clutch Cover Kit - Anodized in Silver or Black by Siberdyne Motorcycle Parts. (Economy Cycle is the USA distributor for Siberdyne products). Note: This fits all years and version of the RD400 (worldwide), also fits the later European RD250. This kit is NOT for the USA RD250/350/R5. See additional info below. Note: this part does not include the engine cover itself.
-
RD400 Clutch Lever Hardware Kit. Includes Bolt, Nut, Washer and Collar.
-
RD400 Exhaust Joint - 2R9 Type (Non-USA, larger diameter) - SOLD EACH. Reproduction part replaces 2R9-14615-00
-
RD400 Exhaust Joint - SOLD EACH. Reproduction part replaces 1A1-14615-02-00.
-
RD400 Footrest Damper. Reproduction part, sold each. 4 required per bike
-
RD400 Gauge Bracket Damper Set - For RD400 (all). Sold as a set of 4 dampers. High quality reproduction rubber part. Replaces OEM part 1A0-83523-00
-
RD400 Gauge Damper Set - For RD400 (all). Sold as a set of 4 dampers. High quality reproduction rubber part. Replaces OEM part 584-83523-00
-
RD400 RD250 RD350 Front Master Cylinder Dust Boot 1A0-25831-00. Reproduction Part, sold each
-
RD400 (all) Rear Sprocket Washer Plate, sold each. Reproduction part no longer available from Yamaha. Replaces OEM part number 90201-66585-00. Laser cut, steel. Also fits XS360, XS400, XS500
-
Rear Tail Light Assembly - RD400 (all years). Complete assembly, lens, base, bulbs, gasket, etc. Reproduction Part.
-
RD400 1976-1978 Speedo/Tach Damper Set - Sold as a set of 2 dampers. High quality reproduction rubber part. Replaces OEM part 1A0-83513-00-00. Note this is the damper inside the gauge cup.
-
Protective fiberglass piece specifically designed for the Yamaha RD400. Fits between tank and seat. Old school racer part used with low cut cafe seats to cover open back area of tank. White. Product is in raw cast state so some minor filling and painting is required.
-
Yamaha RD400 (all) Original Yamaha OEM Petcock. (note: Yamaha now supplies these petcocks with a plastic bowl, originally they were metal. You can use your old metal bowl with the new petcock). 4L0-24500-00-00
-
Yamaha RD400 LC350 Petcock All Years. Reproduction part. Similar to original Yamaha petcock and has on/off/reserve and 2 outputs. Replaces Yamaha part no. 4L0-24500-00-00
-
RD400/LC350 Replacement Fuel Petcock Kit (Fuel Valve/Tap) by Pingl. Includes high quality / high flow dual outlet Pingle petcock with on/off and reserve positions. Includes correct adapter plate for the RD400 (34mm bolt spacing), gasket and hardware for mounting on Yamaha RD400 and LC350 (all years).
-
Brake Lever - RD400F Daytona - replacement brake lever by Bikemaster.
-
Clutch Lever - RD400F Daytona - replacement clutch lever by Bikemaster.
-
RD400F Daytona Front/Rear Caliper O-ring, Reproduction Part, sold in pairs, replaces 2G2-W0044-00-00 (no longer available from Yamaha. Buna O-ring.
-
RD400 1979 Speedo/Tach Damper Set - Sold as a set of 2 dampers. OEM part. Note this is the damper inside the gauge cup.
-
Rear Fuel Tank Dampers, sold in pairs (4 pieces). Suitable for RD400 (all years). High quality reproduction part.
-
Rear Fuel Tank Dampers, new Yamaha OEM, sold in pairs (4 pieces). Suitable for RD400 (all years).
-
Rear Tail Light Lens - RD350 RD250/R5/DS7 (341-84721-60-00)
-
Rear Wheel Bearing Kit - RD250/RD350/R5/DS6/DS7 (all years) by All Balls. Kit includes wheel bearings and seals for rear wheel. Note:sample kit pictured, actual kit may vary slightly from bike to bike.
-
Rear Wheel Bearing Kit - RD400 (76-79) by All Balls. Kit includes wheel bearings and seals for rear wheel. Note:sample kit pictured, actual kit may vary slightly from bike to bike.
-
Rear Wheel Bearing Kit - RZ350 All Years by All Balls. Kit includes wheel bearings and seals for front wheel. Note:sample kit pictured, actual kit may vary slightly from bike to bike.
-
Rear Wheel Bearings by All Balls - Kawasak H2 750. Kit includes wheel bearings and seals for rear wheel. Note:sample kit pictured, actual kit may vary slightly from bike to bike.
-
Reflector - Amber with black backing, 5mm stud - Great for RD's. Diameter approximately 60mm/2.38" - Made in USA, DOT Certified. Sold each. Replaces Yam OEM No. 355-85111-01-00
-
Reflector - Red with black backing, 5mm stud - Great for RD's. Diameter approximately 60mm/2.38" - Made in USA, DOT Certified. Sold each.
-
Grip Glue by Renthal. Eliminates grip slipping and sliding. A must for medium and soft compound grips. .85oz tube.
-
Replacement bulbs for K&S Aluminum Marker Lights - Clear or Amber. Sold each. Dual Filament function for marker and signal.
-
Replacement bulbs for K&S Aluminum Marker Lights - Clear or Amber. Sold each. Single filament function for signal only.
-
Replacement Ignition Coil Kit - for Yamaha RD/R5/YDS6/7. Every thing you need to replace your coils, plug caps and ignition coil wires. Kit Includes the following:
- 2 Replacement Coils, same dimensions as stock coils, same bolt spacing. Easy to mount and install.
- 2 NGK Type 5K Resistor Spark Plug Caps
- 2 Feet of high quality Ignition Coil Wire
-
Rim Strips - High quality - Multiple sizes. Sold each. Choose size and click add to cart.
-
Road Grips Model 717. Feature Pro Grip duo-density technology. Proprietary GONT compound in two densities: one for extra grip on the bars to minimize movement, and the other on the outside of the grip to provide superior comfort and vibration absorption. 7/8" i.d. x 125mm long. Available in black, orange, red, blue, gray, green or yellow. Note: Black w/Black accents not pictured. Choose color and click add to cart.
-
Road Race Grips by Renthal. 25mm grips with full diamond design, feature synthetic rubber compounds specially formulated to achieve the optimum combination of strength, tackiness and shock absorption. Available in soft, medium and firm compounds. Choose compound and click add to cart.
-
Sale!Rollstand by Hardline. Designed for bikes without centerstands. Wheel positioned in turns easily for cleaning, chain and brake adjustment and other maintenance jobs. Easy one-person operation. No danger of dropping bike. Rollstand has sealed bearings, non-slip backing. Red powder coated finish.
