-
Yamaha RZ350 Power Valve Seal Kit. Includes 3 castle type oil seals and 4 O rings. Yamaha OEM part.
-
Ready to run system - bolt on - Racing ignition by Powerdynamo. Engineered and manufactured with high quality components made for the extreme demands of racing. High-speed (up to 22.000rpm) magnet based solid state ignition for sports purposes. At 18.000rpm (i.e. 36.000 sparks/min) still 25kV output. (3.000-8.000rpm = 40kV, see diagram). Diameter of rotor is 59mm, rotor weight 180 gramms. This ignition is for racing, no charging component, no lighting capabilities.
- note: Total loss racing ignition system - requires starter roller or bump start, does NOT work with kick starter
-
RZ350 Thermo Sensor - Canadian Models - All years. Aftermarket Part. (tapered threads)
-
RZ350 Thermo Sensor - Canadian Models - All years. OEM Part.
-
RZ350 Thermo Sensor - US Models - All years. Reproduction part, no longer available from Yamaha. Replaces Yamaha part no. 48H-85790-00-00.
-
RZ350 USA - Front Master Cylinder Reservior Diagphragm
-
RZ350 USA Rear Caliper - Square section O-ring seals for caliper crossover (fits between caliper halves) - reproduction part, not available from Yamaha (sold in pairs)
-
RZ350 VForce 4 Reed Valve Assembly (pair). Sold in pairs, includes reed cages, carbon fiber reeds and gaskets. Assembled and ready to install.
- All new design
- All new reed petal resin system, carbon fiber and lay-up
- Pre-curved reed petal ensures better seal at the tip
- Wider cage for maximum flow
- Combined reed tip area is increased by 10.5% for better air flow
- Airfoil shape added to cage tip to increase velocity from the outer ports
- Long reed stops added to progressively slow reed petal tip velocity for increased petal durability
- Reduced frontal area of the central wing combined with a more aerodynamic shape
- Replacement reeds sold one set per reed cage
- Fits Yamaha RZ350 and Yamaha Banshee
-
RZ350/Banshee Air Box Clamp (secures boot (joint) to air box) 90460-68230-00 Reproduction. Note this part has a yellow/brass finish much different than the original but works well same dimensions as stock clamp. sold each.
-
RZ350/RD350YPVS Thermostat - All years. Reproduction part. Temp 71C.
-
Silicone Radiator Hose Set - RZ350 - Multiple color choices. Set of 4 High Performance Radiator Hoses individually pre-formed hoses specifically for the RZ350. Available in Black, Red, Yellow, Blue or White. Replaces part numbers 22, 30, 32, 35 in the Yamaha Diagram. Click on the picture for more views, color samples and the Yamaha diagram. Stainless steel hose clamp sets also available for this kit here on the site.
-
Silicone Radiator Hose Set - RZ350 - Multiple color choices. Set of 4 High Performance Radiator Hoses individually pre-formed hoses specifically for the RZ350. Available in Black, Red, Yellow, Blue or Natural like the original hoses. Also available in natural black with no logos (not pictured). Race quality part, hand made in England by Samco, Each hose is visually inspected. Max temp 180C/356F. Meets and exceeds SAEJ20R1 Class A standard. By Samco, a leader in high performance silicone hoses used by Wolrd Superbike race teams. Replaces part numbers 22, 30, 32, 35 in the Yamaha Diagram. Click on the picture for more views, color samples and the Yamaha diagram. Stainless steel hose clamp sets also available for this kit here on the site. (the single hose pictured is Natural finish, no printed logos, similar to the original RZ hoses)
-
Spark Plug Cap - 5K or 0K resistance for 14mm spark plug, with 90 degree Elbow (RD/RZ/R5), NGK Type - Reproduction, sold each. These caps are just right for the RDs and other 2 stroke vintage Japanese twins. Includes waterproof covers. For terminal stud type plugs or plugs with removeable terminal nuts (BR8ES, BR8HS). It is not recommended to use both resistor caps and resistor plugs, use either resistor plugs with non-resistor caps, or non resistor plugs with resistor caps.
-
Spark Plug Wrench - 3 Way 14mm/12mm/10mm. Sold each.
-
Speedometer Cable - RZ350 by Motion Pro. High quality cable meets or exceeds OEM standards.
-
Stainless Steel Radiator Hose Clamp Set - RZ350, by Samco. High quality stainless steel radiator hose clamps, set of 8 to go with our hose kits also available here on the site. These clamps are made specifically for silicone hoses and will not pinch or tear the silicone. These clamps are also suitable for the stock rubber hoses. This is a high performance SamcoSport hose clamp kit which replaces your standard factory hose clamps with the highest quality stainless steel worm drive hose clamps available. These hose clamps are entirely made from marine-grade 304 W5 stainless steel and have a 13mm wide band which increases their clamping force. Greatest performance when fitted with your SamcoSport silicone hose kit.
-
RD/RZ Steering Damper Fork Tube Clamp. Billet fork tube clamp. Includes 2 stainless M6x1.0 clamp bolts and one M8x1.25 damper mount bolt. Available in fork tube sizes for many front ends: 34,35,36,38,39,41,43,45,50,52,54mm sizes. Note (RD250/350/400 is 34mm/RD400F Daytona is 35mm, RZ350 is 35mm). Choose clamp size and click add to cart.
-
Superbike Grips Model 699. Unique materials, grip patterns and construction provide a look and feel unlike any other grip. Made from the same high-tech rubber compounds used in Formula One racing cars. Supersoft and superdurable with unsurpassed adhesion. All are open-ended with high-impact plastic end caps. For machines with 7/8" handlebars. Used by Troy Corser and other championship riders worldwide. Made in Italy. Available in black only.
-
Throttle Cable 1 (Yamaha part no. 48H-26260-00-00 superceded to 48H-26260-09-00 superceded to 48H-26260-08-00). Genuine Yamaha Cable. This is the cable that's goes to the 2 way splitter. Note: the RZ has 2 throttle cables, this is cable 1, the other cable is not available at this time.
-
Throttle Cable for Larger Carbs and Stock Throttle Housing w/o Oil Pump Line (VM's, TM's, Keihin, PWK). Built in adjusters allow a wide range of applications. Works with the following carburetors: Mikuni VM Round slides 30, 32, 34, 36, and 44mm Mikuni TM Flat slides 28, 32, 34, 36, and 38mm Keihin PWK 28, 33, 35, 36mm
-
Throttle Cable for Larger Carbs and Stock Throttle Housing with Oil Pump Line (VM's, TM's, Keihin, PWK). Built in adjusters allow a wide range of applications. Works with the following carburetors: Mikuni VM Round slides 30, 32, 34, 36, and 44mm Mikuni TM Flat slides 28, 32, 34, 36, and 38mm Keihin PWK 28, 33, 35, 36mm
-
Throttle Grip Washer (goes between throttle and switch housing). Can be used with all RD's R5's DS6/7 & most bikes with standard 7/8" Grips. Part no. 90201-261L1, washer plate These are often missing causing the throttle to return slowly or not all.
-
The UFO Ultimate Flow Optimizer is a simple, trouble free, aerodynamic piece for stock RZ350/Banshee carbs. The UFO makes a normal round slide carburetor out-perform the more expensive flat slide carburetor by eliminating turbulence and increasing air flow and velocity, creating a highly atomized fuel charge. Normal gains are 3/4 to 1 HP per 100 cc of engine displacement on 4 stroke engines and 1 1/2 to 2 HP per 100cc of engine displacement on 2 stroke engines. (Minimal re-jetting (pilot jet) and tuning are required). Note: This UFO kit is for twin cylinder engines and includes 2 UFO's.
-
Uni Filter - High performance air filter for RZ350. Higher airflow for higher performance. Fit in stock airbox exactly like OEM filter. Longer service intervals, cleans easily with grease-cutting dishwashing detergent; just clean, re-oil and reuse indefinitely. Stop more dirt than paper filters. Uni filter service care kit available here on the site. Made in the U.S.A.
-
VM28 Turbo Throttle and Cable Kit. This kit is used for the original Mikuni VM28 stock carbs or new Mikuni VM28 roundslide carburtetors. This kit includes a quick turn throttle and throttle cable (does not include the carburtetor, pictured for reference only). This kit does not include the cable for the oil pump and is meant for pre-mix applicatons. Cable includes upper, junction and two lower cables. Throttle includes, housing, throttle tube and cable adjuster. Note: this eliminates the original Yamaha throttle which was in the switch housing. You will need to make other provisions for the functions of the switch if you use this set up, intended for highly modified street bikes or racing applications.
-
VM30-38mm Turbo Throttle and Cable Kit. This kit is used for the Mikuni VM (not TM) bigger bore carburetors from 30-38mm. This kit includes a quick turn throttle and throttle cable. No mods required. Note: This kit does not include the cable for the oil pump and is meant for pre-mix applicatons. Cable includes upper, junction and two lower cables. Throttle includes, housing, throttle tube and cable adjuster.
-
Wave Rotor for the RZ350 Front (R/L)/Rear by Galfer (all years), sold each. Stainless steel high carbon content lighter then stock. Lower operating temperature resulting in higher braking power. Less tendancy to warp, corrosion resistant. A great way to update the look of your RZ350. These rotors also fit the Yamaha LC350.
-
Windscreen Edge Trim by Zero Gravity- Black, enough to do one windscreen.
-
Nylon Windscreen Fastener Kit in white or black for use with Zero Gravity and other windscreens. Great replacement for stock windscreen fasteners too.
-
Wiring Diagrams - 11" x 17" - Laminated, Full Color
-
Wiring Diagrams - 8.5" x 11" - Laminated, Full Color
-
Yamaha Banshee Cross Over Tube for use with RZ manifolds. No bend in pipe, not for stock RZ350 carbs. OEM Yamaha part.
-
Yamaha Brake Pads for Yamaha RZ350F1/F2 (Euro/Canadian/Australia 1985-1990 2 piston caliper) - Front/Rear.
-
Genuine Yamaha Parts - Kickstarter rebuild kit for Yamaha RD250/350/400/R5/RZ350/DS7 (all years). Tired of your kickstarter swinging out while you're riding? This kit contains all the parts you need to fix that problem and is easy to install. New spring, steel ball, washer and criclip.
-
Yamaha Main Kickstand Stopper/Damper RD350,RD250,RD400,R5,DS6/7 (all years. Replaces Yamaha part no. 1A0-27114-00-00 or 278-27114-00-00.
-
Yamaha Neutral Switch O-ring Seal RD/RZ/R5/DS6/7, genuine Yamaha part
-
Yamaha Neutral Switch RD/RZ/R5/DS6/7 ALL, Yamaha Part 1L9-82540-00-00
-
Yamaha Neutral Switch Screw. Yamaha Part 98707-05012-00
-
Yamaha RD400 Hand Grips (all years) Pair. Original Yamaha OEM part. Sold in pairs, includes right hand throttle grip and left hand bar grip.
-
RD/RZ/R5/DS6/7 Clutch Cush Drive, by Hinson. 8-pack kit, enough to do one clutch.
-
Yamaha RD250 RD350 DS7 R5 RD200 & Others - Petcock Gaskets (Internal - for bolts that secure petcock to fuel tank). No. 27 on Yamaha fuel tank diagram. OEM part. 90430-06218-00
-
Yamaha RD250 RD350 RD400 R5 RZ350 & Others - Shift Cam (Drum) Bearing
-
Yamaha RD250 RD350 RD400 RZ350 Banshee Clutch Damper Ring, part no. 278-16367-00-00. Rubber Oring that goes between clutch plates, sold each.
-
Yamaha RD250/350/400/R5/DS7/RZ350 (all years) Transmission Rear (Drive) Shaft,, Right Bearing (Yamaha OEM). Original Yamaha OEM Bearing. Current Yamaha part number 93311-42045-00. Sold each.
-
Yamaha RD250/350/400/RZ350 (all) Oil Pump Gasket. - Genuine Yamaha 126-13116-01-00
-
Yamaha RD250/350/400/RZ350 (all) Oil Pump Gasket. - High quality replacement reproduction gasket, replaces Yamaha OEM 126-13116-01-00
-
Yamaha RD350/400/250/R5/DS7/LC250/LC350/RZ350 Crank Shaft Seal (right side/clutch side), Sold each. Genuine Yamaha Seal.
