-
Lazer Grips - Soft Rubber - Value Priced. Super soft rubber compound for a comfortable secure grip. 7/8 bars.
-
Parts Unlimited Brake Lever for Yamaha RZ350.
-
Parts Unlimited Front Fork Seal Set for Yamaha RZ350/RD400F
-
Parts+Plus Steering Stem Bearings. Tapered roller type for superior performance. Made in Japan. Compatible with RD250/350/400, RZ350, LC350 models. Note this product comes in 2 types of package branding (Parts+Plus and K&L) but is the same part/same manufacture.
-
Pro-Lite Rotor for the RZ350 Front (R/L)/Rear by EBC. Complete bolt-on and go rotor assembly. Excellent choice when upgrading or replacing OEM brake rotors, Sold each.
-
Sale!Progressive springs offer a soft initial spring rate for a plush ride while progressively wound design provides increased resistance to bottoming as spring compresses. Improve handling while retaining OEM geometry Made in the U.S.A.! Huge improvement over stock RD400 springs, much more firm for better performance handling. These work great with 10W fork oil, available here on the site. Sold in pairs. Note: This product has additional shipping charges
-
Race Tech Fork Springs - Yamaha RZ350. Available in .00kg, .85kg and .90kg spring rates. Recommneded spring rates: Rider weight up to 175lbs - .80kg Rider weight 175-225lbs - .85kg Rider weight 225-275 - .90kg A High Performance Spring has a high stiffness to mass ratio. In other words, it is light weight for a particular rate. This requires the finest materials. And, of course, you want the specific rate you’re paying for. Most manufacturers hold rates within +/-5%, this means a spring marked 5.0 kg/mm could be a 4.75 or even 5.25. (A spring marked 5.0 could be the same rate as one marked 5.4!) Race Tech Springs have extremely accurate rates because we 100% test our springs. Chrome silicon, high stiffness to mass ratio, shot peened, heat treated and pre-set (no sacking). These are the finest springs available, period! Note: This part is not elidgeable for discount or promotion. Note: This part has additonal shipping charges.
-
Race Tech Gold Valve Fork Emulators for RZ350Damping rod forks are notorious for being both too harsh yet too easy to bottom. This is the nature of damping rod fixed orifice forks. In the past all that could be done to improve these forks was change spring rate, oil viscosity or damping hole size, until now. Cartridge Emulators make damping rod style forks perform like well-tuned cartridge forks. These tunable valves sit on top of the damping rods and are held in place by the main springs. This makes them both simple to install and completely tunable for all conditions and rider preferences. Track tests have consistently produce lap times that are 1 or more seconds a lap faster while Cruisers and Gold Wing owners rave at the increased control and ride quality. Note: This part is not elidgeable for discount or promotion.
-
RD250/350/RD400/RZ350/R5 (all years) Speedometer Cable - Black. Will send either Parts Unlimited or Motion Pro (same cable), meets or exceeds OEM specifications.
-
Rear Wheel Bearing Kit - RZ350 All Years by All Balls. Kit includes wheel bearings and seals for front wheel. Note:sample kit pictured, actual kit may vary slightly from bike to bike.
-
Grip Glue by Renthal. Eliminates grip slipping and sliding. A must for medium and soft compound grips. .85oz tube.
-
Road Grips Model 717. Feature Pro Grip duo-density technology. Proprietary GONT compound in two densities: one for extra grip on the bars to minimize movement, and the other on the outside of the grip to provide superior comfort and vibration absorption. 7/8" i.d. x 125mm long. Available in black, orange, red, blue, gray, green or yellow. Note: Black w/Black accents not pictured. Choose color and click add to cart.
-
Road Race Grips by Renthal. 25mm grips with full diamond design, feature synthetic rubber compounds specially formulated to achieve the optimum combination of strength, tackiness and shock absorption. Available in soft, medium and firm compounds. Choose compound and click add to cart.
-
RZ350 Front Caliper Boot - 4X8-25917-00-00 (larger one). Reproduction Part. Sold each.
-
RZ350 Front Caliper Boot 2 - 5R2-25937-00-00 (smaller one). Reproduction Part. Sold each.
-
RZ350 Oil Lines Grommet 4L0-13174-00 Reproduction. *Part no longer available from Yamaha* This part fits into the top of the engine cover and the oil feed/supply lines pass through it. Each sold separately.
-
RZ350 USA - Front Master Cylinder Reservior Diagphragm
-
RZ350 USA Rear Caliper - Square section O-ring seals for caliper crossover (fits between caliper halves) - reproduction part, not available from Yamaha (sold in pairs)
-
Speedometer Cable - RZ350 by Motion Pro. High quality cable meets or exceeds OEM standards.
-
Superbike Grips Model 699. Unique materials, grip patterns and construction provide a look and feel unlike any other grip. Made from the same high-tech rubber compounds used in Formula One racing cars. Supersoft and superdurable with unsurpassed adhesion. All are open-ended with high-impact plastic end caps. For machines with 7/8" handlebars. Used by Troy Corser and other championship riders worldwide. Made in Italy. Available in black only.
-
Throttle Cable 1 (Yamaha part no. 48H-26260-00-00 superceded to 48H-26260-09-00 superceded to 48H-26260-08-00). Genuine Yamaha Cable. This is the cable that's goes to the 2 way splitter. Note: the RZ has 2 throttle cables, this is cable 1, the other cable is not available at this time.
-
Throttle Cable for Larger Carbs and Stock Throttle Housing w/o Oil Pump Line (VM's, TM's, Keihin, PWK). Built in adjusters allow a wide range of applications. Works with the following carburetors: Mikuni VM Round slides 30, 32, 34, 36, and 44mm Mikuni TM Flat slides 28, 32, 34, 36, and 38mm Keihin PWK 28, 33, 35, 36mm
-
Throttle Cable for Larger Carbs and Stock Throttle Housing with Oil Pump Line (VM's, TM's, Keihin, PWK). Built in adjusters allow a wide range of applications. Works with the following carburetors: Mikuni VM Round slides 30, 32, 34, 36, and 44mm Mikuni TM Flat slides 28, 32, 34, 36, and 38mm Keihin PWK 28, 33, 35, 36mm
-
Throttle Grip Washer (goes between throttle and switch housing). Can be used with all RD's R5's DS6/7 & most bikes with standard 7/8" Grips. Part no. 90201-261L1, washer plate These are often missing causing the throttle to return slowly or not all.
-
VM28 Turbo Throttle and Cable Kit. This kit is used for the original Mikuni VM28 stock carbs or new Mikuni VM28 roundslide carburtetors. This kit includes a quick turn throttle and throttle cable (does not include the carburtetor, pictured for reference only). This kit does not include the cable for the oil pump and is meant for pre-mix applicatons. Cable includes upper, junction and two lower cables. Throttle includes, housing, throttle tube and cable adjuster. Note: this eliminates the original Yamaha throttle which was in the switch housing. You will need to make other provisions for the functions of the switch if you use this set up, intended for highly modified street bikes or racing applications.
-
VM30-38mm Turbo Throttle and Cable Kit. This kit is used for the Mikuni VM (not TM) bigger bore carburetors from 30-38mm. This kit includes a quick turn throttle and throttle cable. No mods required. Note: This kit does not include the cable for the oil pump and is meant for pre-mix applicatons. Cable includes upper, junction and two lower cables. Throttle includes, housing, throttle tube and cable adjuster.
-
Wave Rotor for the RZ350 Front (R/L)/Rear by Galfer (all years), sold each. Stainless steel high carbon content lighter then stock. Lower operating temperature resulting in higher braking power. Less tendancy to warp, corrosion resistant. A great way to update the look of your RZ350. These rotors also fit the Yamaha LC350.
-
Windscreen Edge Trim by Zero Gravity- Black, enough to do one windscreen.
-
Nylon Windscreen Fastener Kit in white or black for use with Zero Gravity and other windscreens. Great replacement for stock windscreen fasteners too.
-
Yamaha Brake Pads for Yamaha RZ350F1/F2 (Euro/Canadian/Australia 1985-1990 2 piston caliper) - Front/Rear.
-
Genuine Yamaha Parts - Kickstarter rebuild kit for Yamaha RD250/350/400/R5/RZ350/DS7 (all years). Tired of your kickstarter swinging out while you're riding? This kit contains all the parts you need to fix that problem and is easy to install. New spring, steel ball, washer and criclip.
-
Yamaha Main Kickstand Stopper/Damper RD350,RD250,RD400,R5,DS6/7 (all years. Replaces Yamaha part no. 1A0-27114-00-00 or 278-27114-00-00.
-
Yamaha RD400 Hand Grips (all years) Pair. Original Yamaha OEM part. Sold in pairs, includes right hand throttle grip and left hand bar grip.
-
Yamaha RD400(all) RZ350(all) Counter Shaft Sprocket Lock Washer. Original Yamaha Part.
-
Yamaha RD400(all) RZ350(all) Counter Shaft Sprocket Lock Washer. Reproduction replaces OEM 90215-21239-00 (originally 90215-21121-00). Also fits Banshee.
-
Yamaha RD400/RZ350 Front Brake Switch. Reproduction Part. replaces OEM 26H-83980-00-00 and 1A0-83980-30-00
-
Yamaha RD400F Daytona Fork Seal 1T3-23145-00-00. OEM Yamaha, sold each.
-
Yamaha RZ350 Fuel Tank Dampers 1J7-24183-02-00 (sold each). Reproduction part.
-
Yamaha RZ350 (US Models) Fork Dust Boots. New original Yamaha OEM part. Sold Each.
-
Out of stockYamaha RZ350 (US Versions) Fork Caps with Preload Adjusters CNC Billet Fork Caps with Pre-load Adjusters. Note: These are for the 84/85 US RZ350 (35mm fork tubes) The common misconception with pre load adjusters is that they increase spring tension. What they really do is allow you to adjust sag correctly. With all the suspension mods happening with these bikes it's easy to end up with the wrong sag. Even with the correct spring rate for your weight, you cannot always get the optimal sag without opening up the forks and adding spacers or cutting springs. These give you about 20mm of adjustment, which when combined with the proper spring rate, will allow you to set sag perfectly and adjust it for your weight and riding style. These also have graduation lines on the stems for easy reference when adjusting. Note: Fork tube size is 35mm, cap thread size is 31mm x 1.5 pitch. Sold in pairs. Kit includes 2 fork caps with pre-load adjusters, o-rings, fork spring discs and installation instructions. Yes you will lose the air forks with these adjusters, but air in forks doesn't work very well as it compresses exponentially. Switching to some of the better after market fork springs and these adjustable pre-load fork caps will really dial in your suspension.
-
Yamaha RZ350 Chain Tensioner - Includes 1x chain tensioner, 1x bolt and 1x nut. 4L0-25389-00-00
-
New Cush Drive for Yamaha the RZ350 & other bikes listed below. High quality reproduction part. Replaces OEM 29L-25364-00-00. Note: includes 3 pieces as pictured
Additional Fitment:
1984 FJ600L - Rear Wheel
1984 FJ600LC - Rear Wheel
1984 RZ350L - Rear Wheel
1985 FJ600N - Rear Wheel
1985 FJ600NC - Rear Wheel
1985 RZ350N - Rear Wheel
1985 RZ350NC - Rear Wheel
1985 RZ350NCII - Rear Wheel
1986 FZ600S - Rear Wheel
1986 FZ600SC - Rear Wheel
1986 RADIAN (YX600S) - Rear Wheel
1986 RADIAN (YX600SC) - Rear Wheel
1987 FZ600T - Rear Wheel
1987 FZ600TC - Rear Wheel
1987 RADIAN (YX600T) - Rear Wheel
1987 RADIAN (YX600TC) - Rear Wheel
1988 FZ600U - Rear Wheel
1988 FZ600UC - Rear Wheel
1988 RADIAN (YX600U) - Rear Wheel
1988 RADIAN (YX600UC) - Rear Wheel
1989 RADIAN (YX600W) - Rear Wheel
1989 RADIAN (YX600WC) - Rear Wheel
1990 RADIAN (YX600A) - Rear Wheel
1990 RADIAN (YX600AC) - Rear Wheel
-
Out of stockSOLD OUT - New batch coming Yamaha RZ350 Fork Brace (USA Models and early models euro/canadian/australian 1983-1985). CNC Billet aluminum fork brace in available in high polish or satin black powdercoat. Includes stainless hardware. Works with stock fork dust boots. Brush (front of picture)/ High Polish (rear of picture) - 1 in stock
Satin Black Powdercoat - 4 in stock
-
Front master cylinder rebuild kit for Yamaha RZ350 by Sudco. Complete master cylinder rebuild kit includes piston, seals, clip and spring. All parts necessary to completely rebuild the master cylinder.
-
Sale!Yamaha RZ350 Front Sprocket by JT (Countershaft Sprocket). Computer designed to achieve ultimate strength at minimum weight. JT combines leading-edge technology with top materials to produce the ultimate quality sprocket. All sprockets are heat-treated and sandblasted to reduce material surface tension. Every sprocket meets or exceeds the highest possible quality standards set for the motorcycle industry. Sprockets made with C45 and chromoly steel alloy. Available in 10-17 teeth. 520 pitch. Sample picture, actual sprocket may vary. Choose sprocket size and click add to cart.
-
Yamaha RZ350 Front Sprocket by Sunstar (Countershaft Sprocket). Manufactured from case-hardened chromoly steel for the ultimate in strength and durability. Parkerizing surface treatment for rust and corrosion resistance. Excellent original equipment quality you expect from the Sunstar brand. Available in 12-17 teeth. Click add to cart and choose size. 520 pitch. Sample picture, actual sprocket may vary. Choose sprocket size and click add to cart.
-
Rear master cylinder rebuild kit for Yamaha RZ350 by Sudco. Complete master cylinder rebuild kit includes piston, seals, clip and spring. All parts necessary to completely rebuild the master cylinder.
-
Yamaha RZ350 Rear Sprocket by JT. 40 Teeth. Computer-designed to achieve ultimate strength at minimum weight. JT combines leading-edge technology with top materials to produce the ultimate quality sprocket. All sprockets are heat-treated and sandblasted to reduce material surface tension. Every sprocket meets or exceeds the highest possible quality standards set for the motorcycle industry. Rear sprockets made with top-quality-grade C45 high-carbon steel. Sample picture, actual sprocket may vary.
-
Yamaha RZ350 Rear Sprocket by Parts Unlimted. 40 Teeth. Sprockets are manufactured to OEM specs using high-grade hardened steel for long life. All match original equipment exactly and feature precision-machined splines and teeth for a perfect fit. Sample picture, actual sprocket may vary.
