-
Yamaha Gauge Bulb Socket/Harness, replaces Yamaha part no.s 360-83131-03 & 360-83131-07 & others. High quality reproduction suitable for Yamaha RDs, R5/DS7 & others. Sold each. Avaiable in singles/doubles
-
These key blanks are for the Yamaha RD400 keys, there is a left and right version of the key blank. Compare the blank in the picture to your key to determine right/left. The grooved lines on the key will either face left or right. These grooves will face the same direction looking at the back or front of the key. Note picture is of original Yamaha key blanks which are no longer available, you will receive a plain generic key blank without the word "YAMAHA" on it. Choose left or right and quantitiy and click add to cart.
-
Genuine Mikuin Vent Line, sold each, precut from Mikuni in approximately 11.5" sections, transparent pink color.
-
Genuine Mikuni Needle Valve Assembly for RD250/350/400. Includes float needle & seat. Metal tip. Needle/seat washers can be found here: Float needle valve washer
-
Genuine NGK 5K Spark Plug Caps (Sold Each) Note: NGK has discontinued these plug caps, order while supplies last.
-
Out of stock***DISCONTINUED*** DO NOT ORDER for reference only. Genuine Yamaha Key Blank for RD250/350. This is a key blank for Yamaha key series 26XX. Key has the word "YAMAHA" on it as pictured. Note: this key is no longer available from Yamaha. Link to RD25/350 generic key blank RD250/350 Key Blank - Generic
-
These original genuine Yamaha key blanks are for the Yamaha RD400 keys, there is a left and right version of the key blank. Compare the blank in the picture to your key to determine right/left. The grooved lines on the key will either face left or right. These grooves will face the same direction looking at the back or front of the key. These original Yamaha key blanks have the word "YAMAHA" on them. Note: the right version of this key is no longer available from Yamaha and we no longer have stock. Choose quantity for left version of key and click add to cart.
-
Goodridge Speed Bleed Nipples. Speed bleed nipples have a one way check valve that keeps air out of the lines when bleeding brakes. Makes brake bleeding a snap and one person job. Sold in pairs. Available in 8mm x 1.0 for all Yamaha RD's (except RD400F Daytona). The Daytona requires 8mm x 1.25. Yamaha RZ350 uses 8 x 1.0
-
1/4 GP Sport Fairing for RD350/400 in gloss black. Includes acrylic smoked windsheild. Measures 18H x 15W X 10D. Note: headlight opening is standard Round 7" diameter (requires larger headlight then stock RD). Includes easy to install mounting kit with brackets and hardware. Fairing is easily painted, simply scuff up surface, prime and color coat. Replacement windshields available.
-
Grease Fittings (Zerk Type). Available in 5mm or 6mm. (6mm for RD/RZ). Zerk type zinc coated grease fitting for most Japanese motorcycles.
-
Grommet 90480-14023-00 Sold each. This grommet is used in many places on the RDs, Rear Fender, Battery Box, Oil Tank, Tail Light, Air Box. High quality reproduction part. Battery Box - RD250/350/400/R5/DS7 Rear Fender - RD250/350/400/R5/DS7 Battery Box - RD250/350/400/R5/DS7 Oil Tank - RD250/350/400/R5/DS7
This part can also be used for RD350 RD250 R5 – Tank Suppor Grommet (mounts to metal tool box cover)
-
Grommet 90480-19032-00 - For RD350 RD250 Air Box. These grommets are solid and mount in holes on each side of the airbox.
-
Halogen Headlight Bulb 12V/35/35W- RD350/250/R5/DS7. Note: This bulb is for the replacment headlight assembly we sell here on the site, Part no. 12-1076 but works on any bike with an H4 headlight bulb connection.
-
Halogen Headlight Bulb 12V/55/60W - Super White Xenon style bulb. Note: This is an H4 style bulb for the replacment headlight assemblies we sell here on the site, or any headlight with a replaceable H4 style bulb. Super White bulbs use a special blue filter coating to produce a whiter brighter light. This is a special heavy duty bulb resistant to shock and vibration. Note: The original stock RD/R5/DS7 headlight was a sealed beam with a non-replaceble bulb and an incandescent reflector and is incompatible with this bulb.
-
Halogen Tail Light Bulb RD(all) R5 - 55/10W Dual filament bulb. This is a 12volt bulb. 10W tail light / 55W Brake light, very bright. RD400 requires 2 bulbs. More Energy Efficient Brighter than incandescent bulbs Easy install Replaces all 1157, 1154, 1034, 2057, 2357, 2397, 3496, and 7528 bulbs. Tail light with original bulbs:
Stock bulb left / Halogen Bulb right
Original
Halogen
-
Handlebars - Multiple Styles. All Bars Same Great Economy Price! (Click on picture for larger view)
Measurements listed in inches (Width, Rise, Pullback, Center Width)
Choose from the following styles: Nighthawk (Chrome) 28,7,9.2,4.8 GP Touring (Chrome) 28,4.2,4.2,4.8 GP Touring (Black) 28,4.2,4.2,4.8 LTD (Chrome) 30,4.8,7.2,4.8 Clubman (Chrome) 28,-8,6,4.82 Drag Bar (Chrome) 28,3.84,0,5.6 Drag Bar (Black) 28,3.84,0,5.6 European (Chrome) 30,2.4,4.8,4.8 Superbike (Chrome) 29.2,3.04,3,4 Superbike (Black) 29.2,3.04,3,4 Daytona (Chrome) 29.2,5.36,3,4.4 Daytona (Black) 29.2,5.36,3,4.4 -
Head Temperature Gauge with 14mm Sensor
- Displays temperatures up to 500°F
- Temperature accuracy within 1°F/°C
- User-selectable display in °F or °C
- Measure and record maximum temperature (resettable)
- Small size (1.9" x 1.0" x .59") with large, easy-to-read display
- Waterproof
- Approximate five-year battery life
-
Sale!Headlight Assembly - 6.25" includes Bucket, Lens, Bulb and Chrome Ring (Great replacement for the RD, easy fit) Black or Chrome
-
Helix Racing Fuel Line - Multiple Color / Sizes. Available in many colors, both solid and transparent, and in several sizes. This is high quality racing fuel line, resists weathering, kinking, and tearing. Abrasion and impact resistant. Contains no plasticizers that cause hardening. Sold in 3 foot lengths. Choose size and color, then click add to cart.
-
Ignition Coil - for Yamaha RD/R5/YDS6/7. Replacement Coil 12V with Mounting Hardware. High performance coil, 5ohm, 30,000+ Volts.
-
Yamaha RD250/350/400 Direct Replacement Ignition Coils. Exact replacement for original type Hitachi coils for RD's. Same bolt spacing as stock. Sold each. We recommend removal/bypassing of ballast resistor on RD400's (easy to do, contact us if you need help).
-
Ignition Coil Kit - for Yamaha RD/R5/YDS6/7. Every thing you need to replace your coils, plug caps and ignition coil wire. Kit Includes the following:
- 2 Replacement Coils 12V with Mounting Hardware, 5ohm, 30,000+ Volts
- 2 NGK Type 5K Resistor Spark Plug Caps
- 2 Feet of high quality Ignition Coil Wire
-
Yamaha RD400 / RD250D Ignition Cover
- Replaces OEM number 1A0-15415-00-00, Fits on the original larger inner cover
- Reproduction Part, no longer available from Yamaha
- Cast Aluminum
- Applications: Yamaha RD400 1976- 1980 (all years worldwide) Yamaha RD250D, DX (Later Euro versions of the 250, **NOT FOR USA 250/350**)
-
Test the integrity and strength of your ignition system. Spark gap is adjustable from 0 to 10mm. Measure spark strength. Will test the ignition on most motorcycles, watercraft, ATVs & snowmobiles
-
2 Stroke Oil Injector Nozzle - RD250/350/400 (carb oil injector nozzle). Economy Cycle reproduction item, no longer available from Yamaha. Sold each.
-
Instrument Dash Light Bulb Speedo/Tach RD(all) R5 12V Sold in Pairs
-
Jet Needle Shim for Mikuni 5 Series Jet Needles. Sold each. These shims are used to make incremental adjustments between clips on jet needles used on Mikuni VM carbs with series 5 jet needles (5DP7, 5L1, etc.).
-
Standard hex jets for Mikuni VM carbs, sold each. Choose jet size and quantity, then click add to cart
-
Kenda Inner Tubes for RD250/350/400/RZ/LC350 Front. Standard inner tube, straight valve, double nut, rubber compound.
-
Kenda Inner Tubes for RD250/350/400/RZ/LC350 Rear. Standard inner tube, straight valve, double nut, rubber compound.
-
Kickstand Relocation Kit by HVC - for bikes with modified exhuast/expansion chambers. Our kit accomplishes two things. It allows the stock side stand to be used with aftermarket exhaust and it takes out that terrible lean angle of the bike when it is resting on the side stand. This kit will work with any after market exhaust using your existing side stand on the following motorcycles:
- Yamaha DS7/R5
- Yamaha RD250/RD350
- Yamaha RD400
- Yamaha RD400F
- Our steel bracket that has black oxide coating to prevent rusting
- A longer spring that is designed and manufactured just for this kit
- Hardware and a drill bit
Note: This item is not eligible for discount
-
Kill Switch - Open type for Vape/MZB/Powerdynamo ignitions running no battery. Momentary type kill switch, kills engine when button is pressed. Includes 24" wire. Handlebar tupe mount.
-
Out of stockKREEM Tank Liner works great on any old and rusty tank.
-
Labyrinth Seal RD250/350/400/R5/DS7 (all years) OEM quality reproduction seal. Original part (278-11515-00-00) no longer available from Yamaha. Measures 62mm o.d. x 30mm i.d. x 18mm width. Sold each.
-
Lazer Grips - Soft Rubber - Value Priced. Super soft rubber compound for a comfortable secure grip. 7/8 bars.
-
Sale!LED Headlight Bulb with Fan for RD's. There's not much clearance in the RD headlight buckets due to all the wires and makes fitting most LED ligths with fans difficult. And without the fan you can't get very bright lights. This compact H4 LED bulb and fan assembly fits nicely in the bucket and at 3,800 lumens is very bright. Note: This bulb is a replaceable H4 type. The original RD headlight was a sealed beam H4 type and the bulb was not replaceable. This bulb is primarly inteneded for use with an aftermarket headlight lens/bulb assembly.
- 3800 Lumens / 1 Amp draw
- Ultra white color
- Built in auto fan
- Installs in minutes - Plug and Play, this compact bulb assembly fits in the RD headlight bucket
- Lifetime warranty
-
LED Instrument Dash Light Bulb Speedo/Tach RD(all) R5 Bright White - 4watt/12V. Sold Each. Note: RD250/350 uses 9x of these, RD400 uses 8x. Replaces Yamaha OEM 123-83516-21-00 Need new sockets / harness? see here Instrument Light Socket
-
Dual Load LED Equalizer. Allows LED turn signals to operate in place of stock incandescent bulb turn signals without replacing the flasher module. Will flash at correct rate. Easy installation, simply splice into existing turn signal system.
-
LED Tail light - Tail, Brake & License Plate Functions. Super compact, modern design. 6 ultra bright LED tail lights and 9 mini LED license plate lights. Measures 4" wide x 1.25" high x 1.5" deep.
-
LED Tail light Bulb - Clear, Sold Each. Dual Function Brake/Tail light. 12V bulb produces a bright LED glow. Replaces standard 1157-style bulb. Sold each
-
ThreeBond Liquid Gasket TB1184 - Great for sealing engine cases!
- A synthetic rubber, visco-elastic sealer that is semi-drying
- Applications include sealing transmission case covers, motorcycle cases, timing chain cases, side covers, 2-piece cylinders, clutch housing bolts and oil filter mounting surfaces
- Excellent resistance to water, oil, gasoline and chemicals; temperature range -40°C to 150°C
- Available in 3.4-ounce net wt. tubes
-
Magnetic Oil Drain Plug for RD's/R5/DS7/RZ350. Also fits most Yamaha motorcycle from the 60's through the mid 80's. Magnetic oil drain plug collects metal particles and debris protecting your engine from damage. Includes washer. M14 x 1.5 (pitch) x 15mm long (threaded portion of bolt and magnetic tip).
-
Main Jet Washer by Mikuni for VM24-28mm carburetors. Sold each. This washer seats under the main jet (on bottom of needle jet).
-
Maintenance Free Sealed Battery for Yamaha R5, DS7 RD250/350/400, RD350LC, RZ35350 From Parts Unlimited. **Batteries will ship via UPS - Provide a street address for shipping - UPS will not ship to a PO Box**. Battery includes acid pack. Note this battery is slightly smaller than stock battery. *additional shipping costs apply to this item, calculated at checkout. Note this is a generic battery and we will occasionally subsitute brand depending on availablity.
-
Master Links - Multiple pitch sizes / styles (Sold each). High quality master links OEM quality. Please contact us prior to or after placing your order if you require a master link. It is important to get the correct size/pitch and specific manufacturer when replacing master links.
-
Metal Quick Disconnect Fuel Coupling with dual shutoff in 3/16", 1/4" or 5/16". When connected fuel will flow & when disconnected fuel will not flow from either side. Use Dual shut-off for fuel tanks equipped with a cross-over line. Feature stainless springs, pin, and latch. These quick disconnect fittings utilize Viton o-rings and may not be compatible with some race fuels. Choose size and click add to cart.
-
Mikuni 24mm TM Flat Slide Carburetor. Square type slide carburetors have increased air flow metering at low engine speeds and the smooth bore design reduces turbulence in the carburetor throat for better response and power delivery throughout the rev range. TM Series bodies are designed to accept Power Jet Kits, which prevent leaning out in 2 strokes during extended full throttle running. Provisions to include Power Jet on 38mm, but power jet can be added to any size flat slide 30mm and above with some modification. Click on picture for larger pictures and jetting specs.
-
Mikuni 28mm TM Flat Slide Carburetor. Square type slide carburetors have increased air flow metering at low engine speeds and the smooth bore design reduces turbulence in the carburetor throat for better response and power delivery throughout the rev range. TM Series bodies are designed to accept Power Jet Kits, which prevent leaning out in 2 strokes during extended full throttle running. Provisions to include Power Jet on 38mm, but power jet can be added to any size flat slide 30mm and above with some modification. Click on picture for larger pictures and jetting specs.
