-
Yamaha OEM Battery Strap - fits RD250/350/400/R5/DS6/7. Original part number 122-82131-00-00, superseded by part no. 26L-82131-00-00. This part is used as the battery strap for the above bikes and the tool kit strap for the RD400 (76-78).
-
Yamaha Damper for Rear Fender and Exhaust bracket. Yamaha part no.ย 168-21639-00-00
-
Yamaha Exhaust Plug - RD250 RD350 RD400 (all years). Sold in pairs.ย 90480-14153-00
-
Yamaha Foot Peg Rubbers, Pair - RD350, RD250, R5, DS6/7. High quality reproduction part. Replaces Yamaha part no. 156-27413-00-00. These are the foot peg rubbers for the rider, not passenger.
-
Yamaha Grommet 90480-12013-00 RD400 Electrical Panel, RD350/250/R5/DS7/RD200 Fender & others. OEM Yamaha part. Sold each.
-
Yamaha Grommet no. 122-24181-00-00 (reproduction) RD200, RD125, RD60, XS650 & Others. See fitment below. (Sold in Pairs)
-
Yamaha Grommet no. 90480-16501-00 RD400F Daytona, XS650/850 & Others - OEM Part. Sold Each.
-
Yamaha Kickstart Rubber Cover RD/R5/DS6/7 ALL. OEM Yamaha
-
Yamaha Kickstart Rubber Cover RD/R5/DS6/7 ALL - High Quality Reproduction part by Economy Cycle
-
Yamaha Main Kickstand Stopper/Damper RD350,RD250,RD400,R5,DS6/7 (all years. Replaces Yamaha part no.ย 1A0-27114-00-00 or 278-27114-00-00.
-
Yamaha RD350/400/250 Oil Line. OEM Yamaha oil line approximately 28", enough to do both carbs. Yamaha OEM no. 90445-05M07-00. The RZ350 requires 2 packages of this oil line.
-
Yamaha Oil Tank Cap and Filler Tube Set - RD350 RD400 RD250 R5/DS7*. Reproduction part includes cap and filler tube. Not available separately. *Note: To use this cap and filer tube on the R5/DS7 you will need to purchase the oil tank tube found here Oil Tank Tube
-
Yamaha RD250/350 Carburetor Boot for Low Top Carburetor, sold each. Yamaha OEM part.
-
Yamaha RD Headlight Mounting Kit. These parts are no longer available from Yamaha, this is a high quality reproduction kit and includes reproductions of the Yamaha part numbers listed below. Note this kit is made for the stock head and stock turn signals. Includes: 498-81464-60-00 x 2 Outer rubber damper (rubber) 498-84163-60-00 x 2 Inner rubber damper (rubber) 498-84145-60-00 x 2 Collar insert (plastic)
-
Yamaha RD, RZ, R5, TZ - Generator Wiring Grommet. Reproduction part no longer available from Yamaha. Excellent high quality replacment part, chemical resistant, creates a dust and water tight seal. These can be used with the stock wiring or when replacing the ignition with the Powerdyanmo system.
-
Yamaha RD250/350/400 Oil Tank Hose. Runs from tank to pump, correct size for side cover grommet.ย 90445-09122-00
-
Yamaha RD250/350/400/R5/DS7 Rubber Choke Plunger Cap (COVER, PLUNGER CAP) reproductin replaces OEM # 802-14173-00-00, sold each
-
Yamaha RD250/350/400/R5/DS7 Shift Shaft Dust Boot. Sold each. No longer available from Yamaha, replaces OEM part no. 278-18131-00-00. High quality reproduction.
-
Yamaha RD250/350/R5/DS6/DS7 Fork Boot, Reproduction, Sold each. 278-23144-50-00
-
Yamaha RD250/350/R5/DS6/DS7 Fork Boots (Dust Seals). Genuine Yamaha Part, sold in pairs
-
Yamaha RD250/350/R5/DS6/DS7 Rubber Gasket under fork guide covers. Reproduction, Sold each. Replaces OEM 214-23163-00-00 superceded by 291-23163-61-00
-
Yamaha RD250/350/400/R5/DS7 Cylinder/Head Rubber Damper kit. (Not for 1979 RD400F Daytona) No longer available from Yamaha, high quality newly manufactured rubber dampers. Kit includes all dampers required for 2 cylinders and 2 heads:
- 20 Head dampers
- 4 Cylinder dampers
-
YYamaha RD250/RD350/RD400/RZ350 - Steering Stem Seal 164-23462-00-00. Reproduction part.
-
YYamaha RD250/RD350/RD400/RZ350 - Steering Stem Seal 164-23462-00-00. Genuine Yamaha Seal.
-
Brand new fresh rubber cush drive for Yamaha RD350 RD250 R5 DS7. Replace your dry-rotted and cracked 30 year old cush drive with newly manufactured OEM replacement. This is an often over-looked part that needs replacing on older bikes and enhances performance, reliability (reduces wear on chain, gears and clutch) and results in a smoother ride and better handling bike. Reproduction part no longer available from Yamaha. Replaces original Yamaha part no. 278-25364-00-00
-
Yamaha RD350 RD250 BRAKE HOSE SUPPORT RUBBER 341-25881-00 BRAKE HOSE PROTECTOR, upper for hard line/brake manifold
-
Yamaha RD400 (1976-78) BRAKE HOSE SUPPORT RUBBER 1A0-25881-01, reproduction part
-
Yamaha RD350 RD250 Side Cover Molding, Left side, sold each. No longer available from Yamaha this high quality reproduction part is true to the original pattern and black plastic material.
-
Yamaha RD350 RD250 Side Cover Molding, Right side, sold each. No longer available from Yamaha this high quality reproduction part is true to the original pattern and black plastic material.
-
Yamaha RD350/400/250 Oil Lines Kit - Reproduction kit includes 4 oil line clamps & enough hose to run both oil lines from the oil pump to the carbs. This oil line does not collapse under pressure and has the same ID (inner diameter) as the original line.ย Available in Black or Clear lines.ย Choose Color and click add to cart.
-
Yamaha RD400 (1976-78) BRAKE HOSE SUPPORT RUBBER 1A0-25881-01, reproduction part
-
Yamaha RD400 (all) Rear Brake Reservoir Hose. Special brake fluid compatible hose, approximately 6.5"/160mm, used to connect rear brake fluid reservoir to master cylinder. Reproduction item, no longer available from Yamaha. Great replacement for stock RD400 line.
-
***OUT OF STOCK*** Yamaha RD400 (all) Rear Brake Reservoir Hose Spring. High quality reproduction spring no longer available from Yamaha. Replaces Yamaha OEM part no. 90501-10406. This spring is used to cover the brake fluid hose from reservoir to master cylinder. Reproduction item, no longer available from Yamaha. Replaces OEM # 90501-10406-00
-
Out of stockYamaha RD400 (all) Speedometer / Tachometer Mounting Kit. Complete rebuild kit with grommets and hardware.
-
Yamaha RD400 - Electrical Panel Grommets 90480-13018 Reproduction Part
-
Yamaha RD400 - Electrical Panel Grommets (3 required per bike). OEM part. 90480-13018-00
-
Yamaha RD400 1976-78 Fork Boots, Genuine Yamaha Part, Sold in pairs
-
Yamaha RD400 1976-79 Fork Boots, Reproduction, Sold each. These boots work with both 34mm & 35mm forks. Replaces Yamaha part no. 584-23144-50 & 1T3-23144-50
-
Yamaha RD400 1976/1977 & RD250/350/R5 - Rear Tail Light Damper Replaces OEM 214-84553-01-00
-
Yamaha RD400 1978 & 1979 Rear Tail Light Damper Replaces OEM 1A2-84753-00-00
-
Yamaha RD400 Foot Pegs, sold in pairs. High quality reproduction part, replaces Yamaha part no. 1A0-27413-00-00
-
Yamaha RD400 All Years Rear Foot Peg Rubbers (Pair) 120-27433-00. High quality reproduction part, replaces Yamaha part no. 120-27433-00
-
Yamaha RD400 Lower Side Cover Grommett 90480-01401-00, replaces OEM part no. 90480-01401-00. Sold each.
-
Yamaha RD400 Oil Tank Grommet (90385-10026-00)
-
Yamaha RD400 Rear Fender Grab Rail Damper (between fender and grab rail on rear fender), sold each. Reproduction part, no longer available from Yamaha. Replaces Yamaha part no. 341-21638-00-00 and 1A2-21638-00-00. Also fits TX750 and TX750A.
-
Yamaha RD400 Seat Damper (all years), sold each. Replaces part no. 214-24724-00-00
-
Yamaha RD400 Tail Light Base 1A0-84712-60 Sheet, Base. This rubber part goes between the bracket and light. Reproduction part no longer available from Yamaha.
-
Yamaha RD400 Throttle Cable Adjuster Cover Replaces OEM #1A0-14169-00-00 (sold each). No longer available from Yamaha, this is a reproduction part.
-
Yamaha RD400 Upper Side Cover Grommet replaces OEM part no. 90480-12053-00. Sold each. Note: 2 required per bike
-
Yamaha RD400C/D, RD250/350, R5, DS7 - Seat Damper, Reproduction, sold each. 174-24741-00-00 & 1L9-24741-00-00
