-
Damper, Chain Guard. RD350 RD400 RD250 R5 DS6/7. Includes damper and metal collar. High quality reproduction part no longer available from Yamaha.
-
Yamaha RD250 RD350 R5 Air Box Strap. This is the rubber strap to secure metal lid on air-box. Reproduction part, no longer available from Yamaha. Sold Each.
-
Damper Washer for Chain Guard. RD350 RD400 RD250 R5 DS6/7. This is the special shaped metal washer (squared edge) used with the rubber chain guard grommet sold here on the site. High quality reproduction part no longer available from Yamaha. Replaces Yamaha part no. 90209-06034-00
-
Collar for Chain Guard. RD350 RD400 RD250 R5 DS6/7. This is the metal washer that goes inside the rubber chain guard damper. High quality reproduction part. See additional fitment below.
-
Sale!Yamaha RD400F Daytona Intake Boots 2V0-14453-00-00 (pair)
-
Yamaha RD400F Daytona Intake Boots - Pair (Carb to Airbox Boots)
- Brand New Reproduction part - Originals no longer available from Yamaha
- Newly Manufactured, soft, flexible and true to the originals, restoration quality part
- Original Yamaha Part no. 2V0-14453-00-00
-
Fits 1979 Yamaha RD400F Daytona Only
-
-
Banjo Bolt Dust Cover For Front Master Cylinder - Fits RD's & most bikes
-
Battery Box Damper For RD400 (all years). Sold each. No longer available from Yamaha, replaces OEM part no. 1A0-21746-01-00. High quality reproduction rubber part.
-
Battery Box Damper Set - For RD250/350/400/R5/DS7. Sold as a set of 4 dampers. High quality reproduction rubber part.
-
Battery Lead / Terminal Cover. Used to cover the battery terminal leads.
-
Brake Bleeder Valve Caps - Vintage Style - set of 2 caps
-
Carb Top Boots - Yamaha 1979 RD400F Daytona. Theses are the accordion type rubber boots that go on top of the Daytona carbs. Sold in pairs, reproduction part. Originals no longer available from Yamaha. 2V0-14169-00-00
-
Carburetor Boots - Carb to Airbox joint for Yamaha R5 and DS7. Exact replacement reproduction part no longer available from Yamaha. High quality rubber, fits R5 and DS7 (all years). Includes 2 replacement clamps and 2 replacement springs.
-
Carburetor Boots - Carb to Airbox joint for RD400, RD250. Exact replacement reproduction part no longer available from Yamaha. High quality rubber, fits 1976-1978 RD250 and RD400. Replaces stock part no. 1A0-14453-01-00. Includes 4 replacement clamps. Note the 250 listed is the later Euro RD250 (looks like USA 400).
-
Collar for Chain Guard. RD350 RD400 RD250 R5 DS6/7. This is the metal washer that goes inside the rubber chain guard damper. OEM Yamaha part. See additional fitment below.
-
Electrical Connector Cover (under side cover for generator/rec/regulator wires) Replaces OEM #256-82599-00-00, similar to original.
-
Forward Fuel Tank Dampers, new Yamaha OEM, sold in pairs. Suitable for RD400 (all years).
-
Fuel Tank Dampers, 4pc set front/rear dampers, new freshly manufactured reproduction. Suitable for RD250, RD350, R5 All years.
-
Grommet 90480-14023-00 Sold each. This grommet is used in many places on the RDs, Rear Fender, Battery Box, Oil Tank, Tail Light, Air Box. High quality reproduction part. Battery Box - RD250/350/400/R5/DS7 Rear Fender - RD250/350/400/R5/DS7 Battery Box - RD250/350/400/R5/DS7 Oil Tank - RD250/350/400/R5/DS7
This part can also be used for RD350 RD250 R5 – Tank Suppor Grommet (mounts to metal tool box cover)
-
Grommet 90480-19032-00 - For RD350 RD250 Air Box. These grommets are solid and mount in holes on each side of the airbox.
-
Neutral Switch Wire Grommet. Reproduction part, no longer available from Yamaha. Sold each.
-
Oil lines grommet. Reproduction part no longer available from Yamaha. This part fits into the top of the engine cover and the oil feed/supply lines pass through it. Sold each.
-
Oil Tank Damper - Yamaha RD350 RD400 RD250 R5 DS6/7, sold each. Replaces part Yamaha part no. 437-21779-00-00 Note: One end of this part is capped
-
Brand new fresh rubber carburetor boots for Yamaha RD350 and R5. Boots protect the carbs and cables from dust, dirt and moisture. These boots go on top of the carbs where the cable enters the slide. These are not the boots that connect the carbs to the air filter box. These are suitable for any round slide carb for street and dirt motorcycles. Sold in pairs.
-
RD350 RD250 R5 DS7 - Tank Suppor Grommet (mounts to tool box cover) 296-23455-00-00. OEM Yamaha. This is part no. 17 from the Yamaha OEM parts diagram page C3 "Side Cover - Tool Box - Battery Box". The parts diagram lists the part no. erroneously as ¢19-02344-50-00, from the research we've done the part no. appears to be 296-23455-00.
-
RD350 RD250 R5 DS7 Side Cover Damper. Sold each. OEM Yamaha Part
-
RD350 RD250 Side Cover Damper. Sold each. High quality reproduction Yamaha Part. Sold Each.
-
RD350 Y-Boot Intake - Genuine Yamaha Part. Also Referred to as JOINT, AIR CLNR, part no 360-14453-00-00
-
RD350 Y-Boot Intake, Also Referred to as JOINT, AIR CLNR, Yamaha part no 360-14453-00-00, this is a reproduction part.
-
RD350/250 1973-1975 Speedo/Tach Damper Set - Sold as a set of 2 dampers. High quality reproduction rubber part. Replaces OEM part 360-83513-00-00. Note this is the visible upper damper on the gauge face, NOT the lower inside the cup.
-
RD350/250 1973-1975 Internal Speedo/Tach Damper - Sold each. High quality reproduction rubber part. Reproduction part Replaces OEM part 360-83523-00-00. Note these go inside the gauge cups and are not visible from the outside.
-
RD350/250/R5/DS7 Footrest Damper. Reproduction part, sold each. 4 required per bike
-
RD400 (all) Side Cover Grommets. New Yamaha OEM, includes all grommets for right side cover for 1976-78 RD400. Also fits 1979 RD400F Daytona right and left side covers (you need one set for each side). OEM part no. 90480-01401-00 x1 & 90480-12053-00 x2
-
RD400 (all) Side Cover Grommets. New Yamaha Reproduction, includes all grommets for right side cover for 1976-78 RD400. Also fits 1979 RD400F Daytona right and left side covers (you need one set for each side). Replaces OEM part no. 90480-01401-00 x1 & 90480-12053-00 x2
-
RD400 Exhaust Joint - 2R9 Type (Non-USA, larger diameter) - SOLD EACH. Reproduction part replaces 2R9-14615-00
-
RD400 Exhaust Joint - SOLD EACH. Reproduction part replaces 1A1-14615-02-00.
-
RD400 Footrest Damper. Reproduction part, sold each. 4 required per bike
-
RD400 Gauge Bracket Damper Set - For RD400 (all). Sold as a set of 4 dampers. High quality reproduction rubber part. Replaces OEM part 1A0-83523-00
-
RD400 Gauge Damper Set - For RD400 (all). Sold as a set of 4 dampers. High quality reproduction rubber part. Replaces OEM part 584-83523-00
-
RD400 1976-1978 Speedo/Tach Damper Set - Sold as a set of 2 dampers. High quality reproduction rubber part. Replaces OEM part 1A0-83513-00-00. Note this is the damper inside the gauge cup.
-
RD400 1979 Speedo/Tach Damper Set - Sold as a set of 2 dampers. OEM part. Note this is the damper inside the gauge cup.
-
Rear Fuel Tank Dampers, sold in pairs (4 pieces). Suitable for RD400 (all years). High quality reproduction part.
-
Rear Fuel Tank Dampers, new Yamaha OEM, sold in pairs (4 pieces). Suitable for RD400 (all years).
-
Rim Strips - High quality - Multiple sizes. Sold each. Choose size and click add to cart.
-
RZ350 Oil Lines Grommet 4L0-13174-00 Reproduction. *Part no longer available from Yamaha* This part fits into the top of the engine cover and the oil feed/supply lines pass through it. Each sold separately.
-
Turn signal grommet 90480-18488 RD250 RD350 RD400 (1976-1978) Sold each.
-
Yamaha RD250, RD350, DS7 R5 (all) Handlebar Bushings Set. Set includes 4 bushings. Reproduciton part. Replaces the following Yamaha part numbers 90385-12020-00 90890-55902-00 278-23434-00-00
-
Yamaha - Handlebar Bushings Set (4 pieces) - RD400 90385-12027-00 x 4 Genuine Yamaha OEM
-
Yamaha - Handlebar Bushings Set (4 pieces) - RD400 90385-12027-00 x 4 Reproduction
-
Yamaha Air Box Damper RD350,RD250,R5,DS7 (all years), sold each. No longer available from Yamaha, replaced OEM part no. 278-14426-00 note: 2 required per bike
