-
Mirrors - Yamaha RD400 RD250/350LC Replacement Mirrors - Pair. Perfect match in fit & finish, just like the original sans the Yamaha Logo. Also available separately RH, LH
-
Motorcycle Related Stickers - Variety 100 pack. Huge variety pack of various motorcylcle related brands, Yamaha, AGV, Bell, AMA, Aria, Simpson, K&N & dozens of others. Easy to paste and remove. Made from PVC.
-
Neutral Switch Wire Grommet. Reproduction part, no longer available from Yamaha. Sold each.
-
Oil lines grommet. Reproduction part no longer available from Yamaha. This part fits into the top of the engine cover and the oil feed/supply lines pass through it. Sold each.
-
Oil Tank Damper - Yamaha RD350 RD400 RD250 R5 DS6/7, sold each. Replaces part Yamaha part no. 437-21779-00-00 Note: One end of this part is capped
-
Oil Tank View Glass - Yamaha R5 & DS7. Reproduction part no longer available from Yamaha. Replaces stock part no. 214-21761-00
-
Oil Tank View Glass - Yamaha RD350 RD250 RD200 RD125. Reproduction part no longer available from Yamaha. Replaces stock part no. 360-21761-00.
-
Parts Unlimited Brake Lever in Black - RD250(75-77Disc)/RD350(all)/RD400(76-78)
-
Parts Unlimited Front Fork Seal Set for Yamaha RD200 All Years
-
Parts Unlimited Front Fork Seal Set for Yamaha RD250/350/400 Note: 1979 RD400F uses FS-011
-
Parts Unlimited Front Fork Seal Set for Yamaha RZ350/RD400F
-
Parts+Plus Steering Stem Bearings. Tapered roller type for superior performance. Made in Japan. Compatible with RD250/350/400, RZ350, LC350 models. Note this product comes in 2 types of package branding (Parts+Plus and K&L) but is the same part/same manufacture.
-
Pirelli Sport Demon Tires for your RD or RZ! Multiple Sizes Front/Rear
The front tire profile is designed to greatly improve handling with excellent water evacuation thanks to central sine-wave groove. The multiple-radius rear tire profile provides lighter and more precise handling and stability in all riding conditions with radial-like handling from bias-ply tires.
-
PJ1 CABLE LUBE - PJ1’s specially formulated cable lube frees up sticky cables, extending cable life. Easy-to-use formula stays around long after other lubes are gone. 16 fl. oz., 11 oz. net weight cans; sold each
-
Plastic Valve Stem Caps - Black (10-Pack). Standard black plastic valve stem caps, sold in packs of 10.
-
Progressive springs offer a soft initial spring rate for a plush ride while progressively wound design provides increased resistance to bottoming as spring compresses. Improve handling while retaining OEM geometry Made in the U.S.A.! Huge improvement over stock RD springs, more firm for better performance handling. For RD250/350/R5/DS, we recommend these springs to be cut down 1.5". These work great with 10-15W fork oil, available here on the site. Sold in pairs. Note this product has additonal shipping charges.
-
Race Tech Fork Springs - RD250/350/R5/DS7 (all) & RD400 (76-78). Available in .70kg, .75kg and .80kg spring rates. Recommneded spring rates: Rider weight up to 150lbs - .70kg Rider weight 150-200lbs - .75kg Rider weight 200-250 - .80kg A High Performance Spring has a high stiffness to mass ratio. In other words, it is light weight for a particular rate. This requires the finest materials. And, of course, you want the specific rate you’re paying for. Most manufacturers hold rates within +/-5%, this means a spring marked 5.0 kg/mm could be a 4.75 or even 5.25. (A spring marked 5.0 could be the same rate as one marked 5.4!) Race Tech Springs have extremely accurate rates because we 100% test our springs. Chrome silicon, high stiffness to mass ratio, shot peened, heat treated and pre-set (no sacking). These are the finest springs available, period! Note: This part is not elidgeable for discount or promotion. Note: This product has additional shipping chargres.
-
Race Tech Fork Springs - RD400 Daytona (1979). Available in .70kg and .75kg spring rates. Recommneded spring rates: Rider weight up to 150lbs - .70kg Rider weight 150-200lbs - .75kg Rider weight 200-250 - .80kg (not available) A High Performance Spring has a high stiffness to mass ratio. In other words, it is light weight for a particular rate. This requires the finest materials. And, of course, you want the specific rate you’re paying for. Most manufacturers hold rates within +/-5%, this means a spring marked 5.0 kg/mm could be a 4.75 or even 5.25. (A spring marked 5.0 could be the same rate as one marked 5.4!) Race Tech Springs have extremely accurate rates because we 100% test our springs. Chrome silicon, high stiffness to mass ratio, shot peened, heat treated and pre-set (no sacking). These are the finest springs available, period! Note: This part is not elidgeable for discount or promotion. Note: This product has additonal shipping charges.
-
Race Tech Gold Valve Fork Emulators for RD250/350/R5/DS7 (all) & RD400 (76-78), sold in pairs.Damping rod forks are notorious for being both too harsh yet too easy to bottom. This is the nature of damping rod fixed orifice forks. In the past all that could be done to improve these forks was change spring rate, oil viscosity or damping hole size, until now. Cartridge Emulators make damping rod style forks perform like well-tuned cartridge forks. These tunable valves sit on top of the damping rods and are held in place by the main springs. This makes them both simple to install and completely tunable for all conditions and rider preferences. Track tests have consistently produce lap times that are 1 or more seconds a lap faster while Cruisers and Gold Wing owners rave at the increased control and ride quality. Note: This part is not elidgeable for discount or promotion.
-
Brand new fresh rubber carburetor boots for Yamaha RD350 and R5. Boots protect the carbs and cables from dust, dirt and moisture. These boots go on top of the carbs where the cable enters the slide. These are not the boots that connect the carbs to the air filter box. These are suitable for any round slide carb for street and dirt motorcycles. Sold in pairs.
-
RD/250350/R5/DS7 Rear Brake Actuator Rod Hardware. OEM Yamaha, includes Spring, nut and pin.
-
RD250/350 Clutch Lever Hardware Kit. Includes Bolt, Nut, Washer and Collar. Original OEM hardware.
-
RD250/350/RD400/RZ350/R5 (all years) Speedometer Cable - Black. Will send either Parts Unlimited or Motion Pro (same cable), meets or exceeds OEM specifications.
-
RD350 RD250 R5 DS7 - Tank Suppor Grommet (mounts to tool box cover) 296-23455-00-00. OEM Yamaha. This is part no. 17 from the Yamaha OEM parts diagram page C3 "Side Cover - Tool Box - Battery Box". The parts diagram lists the part no. erroneously as ¢19-02344-50-00, from the research we've done the part no. appears to be 296-23455-00.
-
RD350 RD250 R5 DS7 Side Cover Damper. Sold each. OEM Yamaha Part
-
RD350 RD250 Side Cover Damper. Sold each. High quality reproduction Yamaha Part. Sold Each.
-
Mirrors - Yamaha RD350 Replacement Mirrors - Pair. Stock mirrors are no longer available from Yamaha for the RD350. These are the closest in size and finish that we could find and make a great stock replacement mirror. Nearly identical to originals. Note: Right hand mirror has left hand threads same as originals. Sold in pairs.
-
RD350 Y-Boot Intake - Genuine Yamaha Part. Also Referred to as JOINT, AIR CLNR, part no 360-14453-00-00
-
RD350 Y-Boot Intake, Also Referred to as JOINT, AIR CLNR, Yamaha part no 360-14453-00-00, this is a reproduction part.
-
RD350/250 1973-1975 Speedo/Tach Damper Set - Sold as a set of 2 dampers. High quality reproduction rubber part. Replaces OEM part 360-83513-00-00. Note this is the visible upper damper on the gauge face, NOT the lower inside the cup.
-
RD350/250 1973-1975 Internal Speedo/Tach Damper - Sold each. High quality reproduction rubber part. Reproduction part Replaces OEM part 360-83523-00-00. Note these go inside the gauge cups and are not visible from the outside.
-
RD350/250/R5/DS7 Footrest Damper. Reproduction part, sold each. 4 required per bike
-
RD400 520 Conversion Shim Kit. Shim kit includes shims for front and rear sprockets used in our 520 conversion sprocket/chain kits for the RD400. Choose model and click add to cart
-
RD400 (all) Rear Master Cylinder Dust Boot. Reproduction Part, sold each
-
RD400 (all) Side Cover Grommets. New Yamaha OEM, includes all grommets for right side cover for 1976-78 RD400. Also fits 1979 RD400F Daytona right and left side covers (you need one set for each side). OEM part no. 90480-01401-00 x1 & 90480-12053-00 x2
-
RD400 (all) Side Cover Grommets. New Yamaha Reproduction, includes all grommets for right side cover for 1976-78 RD400. Also fits 1979 RD400F Daytona right and left side covers (you need one set for each side). Replaces OEM part no. 90480-01401-00 x1 & 90480-12053-00 x2
-
RD400 Clutch Lever Hardware Kit. Includes Bolt, Nut, Washer and Collar.
-
RD400 Exhaust Joint - 2R9 Type (Non-USA, larger diameter) - SOLD EACH. Reproduction part replaces 2R9-14615-00
-
RD400 Exhaust Joint - SOLD EACH. Reproduction part replaces 1A1-14615-02-00.
-
RD400 Footrest Damper. Reproduction part, sold each. 4 required per bike
-
RD400 Gauge Bracket Damper Set - For RD400 (all). Sold as a set of 4 dampers. High quality reproduction rubber part. Replaces OEM part 1A0-83523-00
-
RD400 Gauge Damper Set - For RD400 (all). Sold as a set of 4 dampers. High quality reproduction rubber part. Replaces OEM part 584-83523-00
-
RD400 RD250 RD350 Front Master Cylinder Dust Boot 1A0-25831-00. Reproduction Part, sold each
-
RD400 (all) Rear Sprocket Washer Plate, sold each. Reproduction part no longer available from Yamaha. Replaces OEM part number 90201-66585-00. Laser cut, steel. Also fits XS360, XS400, XS500
-
RD400 1976-1978 Speedo/Tach Damper Set - Sold as a set of 2 dampers. High quality reproduction rubber part. Replaces OEM part 1A0-83513-00-00. Note this is the damper inside the gauge cup.
-
Protective fiberglass piece specifically designed for the Yamaha RD400. Fits between tank and seat. Old school racer part used with low cut cafe seats to cover open back area of tank. White. Product is in raw cast state so some minor filling and painting is required.
-
Brake Lever - RD400F Daytona - replacement brake lever by Bikemaster.
-
Clutch Lever - RD400F Daytona - replacement clutch lever by Bikemaster.
