-
Yamaha OEM Battery Strap - fits RD250/350/400/R5/DS6/7. Original part number 122-82131-00-00, superseded by part no. 26L-82131-00-00. This part is used as the battery strap for the above bikes and the tool kit strap for the RD400 (76-78).
-
Yamaha Condensers - 1966-1967 Yam YL1/YL1E-100 / 1968 YCS1/YCS1C-180 / 1972 CS5-200 / 1974-1976 RD200 - available in right, left or as a set - Close out item, limited quantities available
-
Yamaha Grommet no. 90480-16501-00 RD400F Daytona, XS650/850 & Others - OEM Part. Sold Each.
-
Yamaha R5 or DS6/7 Condensers - available in right, left or as a set
-
Yamaha RD Headlight Mounting Kit. These parts are no longer available from Yamaha, this is a high quality reproduction kit and includes reproductions of the Yamaha part numbers listed below. Note this kit is made for the stock head and stock turn signals. Includes: 498-81464-60-00 x 2 Outer rubber damper (rubber) 498-84163-60-00 x 2 Inner rubber damper (rubber) 498-84145-60-00 x 2 Collar insert (plastic)
-
Yamaha RD Points Plate Screw Kit (98580-04008-00). For RD250/350/400/R5/DS7. Kit includes one screw, 2 washers.
-
Yamaha RD Replacement Turn Signal. High quality reproduction turn signal for RD's and various other Yamaha models from the mid to late 70's. Not exact duplicates of original but close. DOT approved, can be use front/rear, left/right. Chrome finish/amber lens. Replacement lenses available. Sold each.
-
Yamaha RD Replacement Turn Signal Collar - Front 360-83316-00. Sold each. Fits RD250/350/400
-
Yamaha RD Replacement Turn Signal Collar - Rear 360-83326-00. Sold each. Fits RD250/350/400
-
Yamaha RD Replacement Turn Signal Lens, available in Amber or Red. High quality reproduction replacement turn signal lens for RD's and various other Yamaha models from the mid to late 70's. DOT approved, sold each. Choose lens color and click add to cart.
-
Yamaha RD, RZ, R5, TZ - Generator Wiring Grommet. Reproduction part no longer available from Yamaha. Excellent high quality replacment part, chemical resistant, creates a dust and water tight seal. These can be used with the stock wiring or when replacing the ignition with the Powerdyanmo system.
-
Yamaha RD250 Front Brake Switch part no. 395-83980-09-00. also fits RD60,RD125, RD200,RD125,RD200,DT's.
-
Yamaha RD250 RD350 R5 RD400 Points Cams. Reproduction part no longer available from Yamaha. The body and cam profile are fully CNC machined to original specs from steel, then heat treated and then glass beaded. Restores the actuation of your stock "twin points" set-up instead of using expensive electronic units. Click on picture for larger and other views. Choose model and click add to cart Yamaha RD250 RD350 R5 RD400 Points Cams replaces oem part no.'s 278-81651-20-00 1A0-81651-20-00
-
Complete ignition tune-up kit for Yamaha RD250 / RD350. Includes condensor, 2 contact point sets with correct overlapping backing plates L/R. **we are currently out of stock on this part - will be approximately 2 months before re-supply (November 24). You can backorder this part and we will ship it to you upon arrival.
-
Yamaha RD250/350 (all) Tail Light Wiring Harness. Reproduction.
-
Yamaha RD250/350/400 Battery Wiring Harness Yamaha RD400 (all years) Battery Wiring Harness. This is the short harness that connects to your battery +/- with ring terminals on one end, bullets on the other. This harness is made with 14 gauge primary wire, 6mm ring terminals suitable for most batteries and standard yamaha 4mm bullet connectors (Red female/Black male) and black loom. Includes rubber block cover for + battery terminal. Reproduction part as close to the original as possible. Yamaha RD250/350 (all years) Battery Wiring Harness. This is the short harness that connects to your battery +/- with ring terminals on one end, bullet/ring on the other. This harness is made with 14 gauge primary wire, 6mm ring terminals suitable for most batteries and standard yamaha 4mm bullet connectors (Red female/Black male) and black loom. Includes rubber block cover for + battery terminal. Reproduction part as close to the original as possible.
-
Yamaha RD250/350/400/R5/DS7 Points Cam Lubricator - Felt Pad. Sold each. Reproduction part, no longer available from Yamaha.
-
Yamaha RD350/250 (all) Regulator / Rectifier. Replacement regulator/rectifier built to OEM specs. One year warranty. Same OEM plug ends. This unit can be mounted in stock location, but slightly different than stock.
-
Yamaha RD400 (all) Regulator / Rectifier. Replacement regulator/rectifier built to OEM specs. One year warranty. Same OEM plug ends as 1976-78. 1979 RD400 will require different plug, 4 Pin connector block and spades available here on the site. This unit can be mounted in stock location, but slightly different than stock.
-
Yamaha RD400 1976/1977 & RD250/350/R5 - Rear Tail Light Damper Replaces OEM 214-84553-01-00
-
Yamaha RD400 1978 & 1979 Rear Tail Light Damper Replaces OEM 1A2-84753-00-00
-
Complete ignition tune-up kit for Yamaha RD400. Includes, condensor, 2 contact point sets and lubrication. Note: Due to changes in Yamaha production, the 1979 RD400F Daytona was fitted with either RD350 points or RD400 points. RD350 style points slide over a center peg on the plate, RD400 style points have a peg on the back of the points. If you cannot determine which style points your Daytona has, please contact us at 224-430-7971. If your Daytona uses the style points that slide over an existing peg, then order RD350 ignition tune up kit, part no 634-204. Note: This item is not eligible for discount or special promotion.
-
Yamaha RD400 Tail Light Base 1A0-84712-60 Sheet, Base. This rubber part goes between the bracket and light. Reproduction part no longer available from Yamaha.
-
Yamaha RD400 XS650 Kill Switch Red Caution Strip. Aftermarket part, no longer avaialable from Yamaha. Fits 1976-1979 Yamaha RD400 and 1976-78 US XS650 and 1976-84 Euro XS650. Newly manufactured in UV resistant ABS plastic, identical to original.
-
Yamaha RD400(all) Fuse Block. Includes all pictured and fuses.
-
Yamaha RD400/RZ350 Front Brake Switch. Reproduction Part. replaces OEM 26H-83980-00-00 and 1A0-83980-30-00
-
Yuasa Maintenance Free Sealed Batteries for Yamaha R5, DS7 RD250/350/400, RD350LC, RZ350. Yuasa is a premium Japanese battery. Special absorbed-glass mat battery eliminates water loss, permitting the battery to be permanently sealed once it is filled with acid; Acid pack included. Truly the world’s finest “install it and forget it” motorcycle battery **Batteries will ship via UPS - Provide a street address for shipping - UPS will not ship to a PO Box**. Note this battery is slightly smaller than original stock battery. *additional shipping costs apply to this item, calculated at checkout.
-
Yuasa Premium Conventional Battery for Yamaha R5, DS7 RD250/350/400. Great OEM replacement. Only Yuasa has the YuMiCRON, the most powerful lead-acid battery of its size, which appears as original equipment on more and more big bikes. **Batteries will ship via UPS - Provide a street address for shipping - UPS will not ship to a PO Box**. Battery does not include acid. *additional shipping costs apply to this item, calculated at checkout.
-
Programmable Ignition Controller and Programmer by Zeeltronic for Yamaha RD250/350/400,R5 and DS6/7
- Fully programmable ignition curve from 200-20,000 rpm in as little as 100 rpm increments
- 3 stage rev limiter. Stage 1 retards timing, stage 2 reduces spark, stage 3 cuts spark off completely avoiding over rev and blown motors
- Real time monitoring of revs and timing angle
- Store up ten custom programmed curves on board
- Easy and fast programming via handheld programmer
- Circuit is protected against reverse supply voltage (wrong connection)
- Signal delay compensation – allows you to accurately set your static baseline timing
- This bundled package includes the Zeeltronic VCDI04 Ignition Controller, Zeeltronic Handheld Programmer, instructions, resistors and wiring diagrams (items can also be purchase separately). Also included is a baseline curve suitable for a street performance RD
- As with any high performance modification, the wrong ignition curve can have catastrophic consequences. We recommend professional tuning help when modifying ignition curves.
- This system is an add on to the Vape/Powerdynamo/MZB RD street ignition giving you the ability to have dynamic timing and other features on your RD,R5,DS6/7 and early liquid cooled TZ250’s. This system only works with the Vape/Powerdynamo/MZB ignition. It does not work with stock magneto/points/condenser type ignitions. To use this system you must first upgrade your stock RD,R5, DS6/7 stock ignition to the Vape/MZB/Powerdynamo street CDI ignition, also available here on the site. It does not work with the Racing version of the ignition
- This system requires a stable 12V dc power supply (battery)
- 90 day warranty against mfg defects
- Offered exclusively by Economy Cycle
